GE通用電氣IS220PPROS1B Mark VIe UCSA 控制器

 

IS220PPROS1B 簡介：

存儲和認證：IS220PPROS1B控制器模塊設計用于與 Mark VIe UCSA 控制器配合使用。它采用緊湊型閃存存儲來滿足其操作需求。值得注意的是，該控制器未經過 IEC61508 安全回路使用認證，這意味著它可能不適合具有嚴格安全要求的應用。

電源要求：IS220PPROS1B模塊需要 18 V DC 至 32 V DC 范圍內的電源。這種電源輸入的靈活性，典型功耗為 12.5 瓦，確保了與各種電源的兼容性，使其具有多功能性和適應性。

溫度耐受性：IS220PPROS1B控制器具有強大的溫度耐受性，使其能夠在各種環境條件下有效運行。它可以在0至65攝氏度的溫度范圍內可靠地工作。此外，它的設計無需風扇進行冷卻，簡化了安裝和維護，同時保持了涼爽的運行狀態。

危險環境：IS220PPROS1B控制器模塊適合在危險環境中使用，并且符合 NFPA Class 1, Div. 2 個應用程序。這意味著它可以安全地用于存在潛在爆炸性物質的區域，進一步擴大了其可能的用例范圍。

前面板連接：IS220PPROS1B控制器模塊的前面板具有一組用戶友好的連接選項。它包括六個母插孔連接器，可實現輕松、安全的電纜連接。此外，還提供USB端口，方便數據交換和配置。該面板還包含一系列 LED 指示燈，可提供有關模塊狀態和操作的寶貴信息。

LED 指示：前面板上的 LED 指示燈可讓您了解控制器的狀態。面板左側的 Link/Act LED 指示燈提供網絡連接的實時反饋。面板中央有一排 LED 指示燈，分別標有 Power、Boot、Online、Flash、DC（指示電源狀態）和 Diag（診斷狀態）。這些 LED 可以輕松監控控制器的運行狀況并檢測任何問題。

以太網連接：支持通過插孔連接器進行以太網連接。此功能允許與其他控制系統無縫集成，例如 Mark VI、Mark VIe 或 EX2100 勵磁控制系統。它還有助于與維護站和操作員站進行通信，從而實現遠程監控和控制功能。

 

IS220PPROS1B Introduction:
Storage and authentication: The IS220PPROS1B controller module is designed to be used in conjunction with the Mark VIe UCSA controller. It uses compact flash storage to meet its operational requirements. It is worth noting that the controller has not been certified for use in IEC61508 safety circuits, which means it may not be suitable for applications with strict safety requirements.
Power requirements: The IS220PPROS1B module requires a power supply within the range of 18 V DC to 32 V DC. The flexibility of this power input, with a typical power consumption of 12.5 watts, ensures compatibility with various power sources, making it multifunctional and adaptable.
Temperature tolerance: The IS220PPROS1B controller has strong temperature tolerance, allowing it to operate effectively under various environmental conditions. It can reliably operate within a temperature range of 0 to 65 degrees Celsius. In addition, its design does not require a fan for cooling, simplifying installation and maintenance while maintaining a cool operating state.
Hazardous environment: The IS220PPROS1B controller module is suitable for use in hazardous environments and complies with NFPA Class 1, Div. 2 applications. This means that it can be safely used in areas with potential explosive substances, further expanding its possible use case range.
Front panel connection: The front panel of the IS220PPROS1B controller module has a set of user-friendly connection options. It includes six female socket connectors for easy and safe cable connections. In addition, USB ports are provided for convenient data exchange and configuration. The panel also includes a series of LED indicator lights that provide valuable information about module status and operation.
LED indicator: The LED indicator light on the front panel allows you to understand the status of the controller. The Link/ACT LED indicator on the left side of the panel provides real-time feedback on network connectivity. There is a row of LED indicator lights in the center of the panel, labeled with Power, Boot, Online, Flash, DC (indicating power status), and Diag (diagnostic status). These LEDs can easily monitor the operation status of the controller and detect any issues.
Ethernet connection: Supports Ethernet connection through socket connectors. This feature allows seamless integration with other control systems, such as Mark VI, Mark VIe, or EX2100 excitation control system. It also facilitates communication with maintenance stations and operator stations, enabling remote monitoring and control functions.