1769-L32C introduction ControlLogix achieves excellent performance in a simple to use environment and can be considered an industrial model. The ControlLogix controller has a * storage capacity of up to 32 MB and supports process-intensive applications and fast motion control applications. You can select different storage capacity controllers based on application requirements. A standard 1 GSD card can be used as removable storage for the program. Multiple processors, various communication modules and I/O can be mixed without restriction. The processor does not need to perform I/O Bridges and routing. As the system grows, the available network distributes control to another rack.

1769-L32C introduces the working principle of the circuit is that when the voltage of the two input power supplies is the same (the difference is less than 100mV), G2 controls the two MOSFETs to be switched on at the same time, so that the two inputs provide current to the load at the same time. When the input supply voltage is different, the output supply voltage can be higher than an input supply voltage, then the LTC4416 prevents the output from backing up to the input current. This is because the chip is always monitoring the voltage difference between the input and output. 1769-L32C When the voltage on the output side is higher than 25mV on the input side, the chip controls G1 or G2 to turn off the MOSFET to prevent the current from reversing the current. Other control chips are similar in preventing backflow.