描述

1783-BMS10CGN 管理型以太網交換機

Allen-Bradley 1783-BMS10CGN是Stratix以太網I/P管理交換機。該以太網交換機共有10個以太網端口，其中8個快速以太網(FE)銅端口和2個千兆以太網(GE)端口。該以太網交換機可用于實現具有更高級別安全性和彈性的工業架構。

它由外部24VDC電源供電，功耗為15瓦@ 24VDC / 40°C(104°F)，最大功耗為20瓦。它的功耗為20瓦。1783-BMS10CGN具有集成報警繼電器，觸點額定值為1 A @ 30V DC或0.5 A @ 48V DC。

支持千兆以太網(Gigabit Ethernet, GE)的combo端口可安裝用于光纖層的SFP (Small Form-factor Pluggable)收發器。它也可以安裝1784-SD1，用于保存以太網交換機的配置，方便地將配置轉移到其他類似的管理以太網交換機。

對于以太網連接，推薦使用符合IEC 60603-7標準的RJ45連接器和符合TIA 568-B標準的2(2)對或4(4)對5e類最小電纜。1或5類電纜符合ISO/IEC 24702。報警繼電器端子信號線推薦線徑為0.5 ~ 0.8 mm. sq?；?0-18 AWG實心或絞合，UL/ csa額定樣式1007或1569雙絞線對銅電器布線材料(AWM)線，6.3毫米(0.25英寸)±0.5毫米(0.02英寸)帶長度。對于直流電源連接，合適的線尺寸為0.5…0.8 mm平方?；?0-18 AWG實心或絞合銅線，絕緣等級為75°C(167°F)或更高，最大絕緣厚度為1.2 mm(3/64英寸)，帶長度為6.3 mm(0.25英寸)±0.5 mm(0.02英寸)。

1783-BMS10CGN交換機共有10個端口。其中8個端口是銅(RJ-45)端口，它們支持快速以太網。其中兩個端口是組合端口，它們同時支持銅線和光纖連接。combo接口支持的網絡速度為千兆以太網。1783-BMS10CGN開關采用開放式外殼，其額定溫度為T4北美溫度代碼。1783-BMS10CGN開關的重量和尺寸分別為3.05磅和5.1 x 3.6 x 5.345英寸。1783-BMS10CGN開關工作于12至48伏直流輸入電壓之間。開關的電流消耗范圍為0.5到2安培。1783-BMS10CGN開關的典型功耗為15瓦，最高可達20瓦。開關能承受的最高環境溫度為60攝氏度。在較高的環境溫度下，開關性能會下降，也會損壞開關。

1783-BMS10CGN 管理型以太網交換機

The Allen-Bradley 1783-BMS10CGN is a Stratix Ethernet I/P managed switch. This ethernet switch features a total of Ten (10) Ethernet ports with Eight (8) Fast Ethernet (FE) Copper ports and Two (2) Gigabit Ethernet (GE) ports. This Ethernet switch may be used for implementing industrial architecture with increased level of security and resiliency.

It is powered by an external 24VDC supply voltage with a power consumption of 15 Watts @ 24V DC/ 40 °C (104 °F) with maximum consumption of 20 Watts. It has a power dissipation of 20 Watts. The 1783-BMS10CGN has an integrated alarm relay with contact rating of 1 A @ 30V DC or 0.5 A @ 48V DC.

The combo ports which supports Gigabit Ethernet (GE) may be installed with Small Form-factor Pluggable (SFP) transceiver, used for fiber-optic layer. It may also be installed with a 1784-SD1, used for saving the ethernet switch’ configuration and convenient transfer of configuration to other similar managed ethernet switch.

For Ethernet connection, recommended wire assembly is RJ45 connector according to IEC 60603-7 and Two (2) or Four (4) pair Category 5e minimum cable according complying to TIA 568-B.1 or Category 5 cable according to ISO/IEC 24702. For terminating signal wires to the alarm relay, recommended wire size is 0.5-0.8 mm. sq. or 20-18 AWG solid or stranded, UL/CSA-rated style 1007 or 1569 twisted-pair copper appliance wiring material (AWM) wire, 6.3 mm (0.25 in.) ±0.5 mm (0.02 in.) strip length. For DC power connection, appropriate wire size is 0.5…0.8 mm sq. or 20-18 AWG solid or stranded copper wire with insulation rating of 75 °C (167 °F) or greater, and maximum insulation thickness of 1.2 mm (3/64 in.) with strip length of 6.3 mm (0.25 in.) ±0.5 mm (0.02 in.).

There are a total of 10 ports on the 1783-BMS10CGN switch. Eight of these ports are copper (RJ-45) ports and they support Fast Ethernet. Two of the ports are combo ports and they support both copper and fiber connectivity. The network speed supported by the combo ports is Gigabit Ethernet. The 1783-BMS10CGN switch comes in an open enclosure which is rated with the T4 North American temperature code. The weight and dimensions of the 1783-BMS10CGN switch are 3.05 pounds and 5.1 x 3.6 x 5.345 inches, respectively. The 1783-BMS10CGN switch works with DC input voltages between 12 and 48 Volts DC. The current consumption of the switch ranges from 0.5 to 2 Amps. The typical power consumption of the 1783-BMS10CGN switch is 15 Watts which can go up to a maximum of 20 Watts. The maximum ambient temperature which the switch can tolerate is 60 degrees Celsius. At higher ambient temperatures, the switch performance will degrade and the switch can also be damaged.

 

DS200DCTBG1B GE接觸器驅動板	hmv01.1.1 r – w0018 – a -07- fnn1力士樂HMV系列電源器件
if8i Allen Bradley ControlLogix模擬輸入模塊	810-082745-003 LAM plc /機器控制
8 msa3l。R0-30貝加萊伺服電機	用于交流測量的TAP-210DG/3 DEIF換能器
BINT-12C ABB接口板	FANUC驅動放大器
1769-L33ERMS艾倫布拉德利5570緊湊型GuardLogix控制器	2080-LC50-48QWB Allen Bradley Micro 850邏輯控制器
Allen-Bradley PowerFlex 753交流驅動器	2085-IF8 Allen Bradley擴展I/O模塊
橫河模擬輸入模塊	IT8000E系列-稱重端子
1756-ENT2R艾倫布拉德利以太網通信模塊	IC670ALG230 GE 8點模擬電流源輸入模塊
MPL- b430p – mk74aa Allen-Bradley Kinetix MPL低慣量伺服電機	IC670ALG330 GE 8點模擬電流源輸出模塊
MHD115C-058-PG1-BA力士樂同步電機	th300 – e1 – h ABB頭戴式溫度變送器
SCE903AN-002-01太平洋科學高性能數字伺服驅動器	MS-NAE5510-2強生MS-NAE系列網絡層控制器

 

公司介紹：
成都陽光不斷創新致力于提升停產的自動化零件供應水平，無論客戶身處何地，無論所需配件多么稀有，我們總能將客戶與所需產品緊密連接 ，成都陽光零部件覆蓋廣泛。
急切需要自動化或控制零件？ 全新、Used和已停產的自動化機械零件的全球供應商。
客戶支持快速響應
合作伙伴網絡橫跨各個大洲
全球合作伙伴網絡




Company Introduction:
Chengdu Sunshine Xihe Co., Ltd. specializes in one-stop procurement consulting for imported industrial spare parts, offering original equipment and professional discontinued parts services. We are committed to providing efficient and reliable automation solutions for our customers. Customer support fast responseThe network of partners spans all continentsGlobal partner networkAlways achieve more delivery, be it parts, service or speed



始終實現更多的交付，無論是零件、服務還是速度