描述

2N3A3110-C 東芝模塊TOSHIBA

2N3A3110-C東芝模塊TOSHIBA 2N3A3110-C，2N3A3620-B, 2N3A8130-A, 2N3A3120-D東芝模塊，芝IGCT模塊

東芝集團創立于1875年,致力于為人類和地球的明天而努力奮斗,力爭成為能創造豐富的價值并能為全人類的生活、文化作貢獻的企業集團,東芝集團

業務領域包括數碼產品、電子元器件、社會基礎設備、家電等東芝模塊TOSHIBA 2N3A3110-C安裝調試.確保2N3A3110-C在設定地址前完成電力

排線.2N3A3110-C先送內機電源再送外機電源,如果在開啟室內機之前開啟室外機,外機P.C.板 上7段顯示碼會顯示E19，直至開啟室內機電源。

.自動尋址可能會花費十分鐘時間(正常為5分鐘) .自動尋址要求在室外機操作。 (僅打開電源不能自動尋址。) .自動尋址會使用到室外機P.C.板界面

上的SW15按鍵1.首先送上室內機電源，然后再送室外機電源。2.電源送 上后確認室外主機P.C.板界面上7段顯示板顯示U.1.L08(此時U.1.閃爍)3.按下

SW15 (7段顯示板有了變化松開，正常3秒左右)開始自動尋址(通常為5分鐘)。4.7段 顯示指示Auto1然后Auto2到Auto3指示U.1.- -(U.1. 閃爍)開

始在顯示器上閃爍后。閃爍停止顯示器顯示U.1.- -(U.1.燈常亮)， 設定完成。調試前準備工作1.確定保壓正常,系統無漏。2. 算好銅管每米追加量與

機組的修正量。3. 液管與氣管閥門打開。

2N3A3110-C 東芝模塊TOSHIBA

2N3A3110-C TOSHIBA 2N3A3110-C, 2N3A3620-B, 2N3A8130-A, 2N3A3120-D Toshiba module, IGCT module

Founded in 1875, Toshiba Group is committed to striving for the future of humanity and the planet, striving to become a business group that can create rich value and contribute to the life and culture of all mankind

Business areas include digital products, electronic components, social infrastructure equipment, home appliances and other TOSHIBA modules Toshiba 2N3A3110-C installation and commissioning. Ensure that 2N3A3110-C completes power before setting the address

2N3A3110-C Sends the internal power supply before the external power supply. If the outdoor power supply is started before the indoor power supply, the external power supply is P.C. The seven-segment display code on the board displays E19 until the indoor unit is powered on.

Auto addressing may take up to ten minutes (normal is 5 minutes). Auto addressing requires outdoor unit operation. (Power on alone does not automatically address.) Automatic addressing is used to the outdoor unit P.C. board interface

SW15 button 1. Power to the indoor unit first, and then to the outdoor unit. 2. After the power is powered on, check that the seven-segment display board on the outdoor host P.C. board displays U.1.L08(U. Blink)3. Press down

SW15 (7-segment display board with a change to release, normal 3 seconds or so) begins auto-addressing (usually 5 minutes). Segment 4.7 shows indication Auto1 and then Auto2 through Auto3 indicates U.1. — (U.1. Flash on

After flashing on the display. Blinking Stop display U.1 — (U.1. Light is on), setting is complete. 1. Ensure that the pressure retention is normal and there is no leakage in the system. 2. Calculate the amount of copper pipe per meter and

Unit correction amount. 3. Open the liquid pipe and gas pipe valves.

公司介紹：
成都陽光不斷創新致力于提升停產的自動化零件供應水平，無論客戶身處何地，無論所需配件多么稀有，我們總能將客戶與所需產品緊密連接 ，成都陽光零部件覆蓋廣泛。
急切需要自動化或控制零件？ 全新、Used和已停產的自動化機械零件的全球供應商。
客戶支持快速響應
合作伙伴網絡橫跨各個大洲
全球合作伙伴網絡




Company Introduction:
Chengdu Sunshine Xihe Co., Ltd. specializes in one-stop procurement consulting for imported industrial spare parts, offering original equipment and professional discontinued parts services. We are committed to providing efficient and reliable automation solutions for our customers. Customer support fast responseThe network of partners spans all continentsGlobal partner networkAlways achieve more delivery, be it parts, service or speed



始終實現更多的交付，無論是零件、服務還是速度