描述

350040M 用于監測物體位移的設備

?該監測器通道成對組態，一次多可執行上述功能中的2 個。通道1 和通道2 執行一個功能，通道3 和通道4 執行另一個功能或同一功能。

3500/40M 監測器的主要功能為:

1) 通過連續不斷地將機器振動當前值與組態中的報警值進行比較，并驅動報警系統，從而

達到保護機器的目的；

2) 為操作人員和維護人員提供關鍵設備的振動信息。通過組態，每一通道通常將輸入信號處理成“靜態值”。每一靜態值都有組態好的警告報

警值，每?jī)蓚€(gè)靜態值都可組態一個危險報警值。報警的延遲時間可通過軟件設定。前面板LED（發光二極管）OK LED: 指示3500/40M 正常運行TX/RX LED: 指示3500/40M 正與3500 框架內其它模塊通訊Bypass LED: 指示3500/40M 處于旁路模式傳感器緩沖輸出: 前面板對應每一通道均有同軸接頭，每一同軸接頭都有短路保護。

位移監測器是一種用于監測物體位移的設備。它可以用于各種領域，如建筑工程、橋梁、隧道、礦山等，以確保物體的位移不超過安全范圍。

位移監測器的種類很多，包括機械式、電子式、光學式等。其中，機械式位移監測器通常采用滑動塊或滾動珠等機械部件來測量物體的位移量。電子式位移監測器則采用傳感器和電子電路等技術來測量物體的位移量。光學式位移監測器則采用光學原理來測量物體的位移量。

350040M 用于監測物體位移的設備

The monitor channels are configured in pairs to perform 2 of the above functions at a time. Channels 1 and 2 perform one function, and channels 3 and 4 perform another function or the same function.

The main functions of the 3500/40M monitor are:

1) By continuously comparing the current value of the machine vibration with the alarm value in the configuration, and driving the alarm system, thus

Achieve the purpose of protecting the machine;

2) Provide vibration information of critical equipment for operators and maintenance personnel. Through configuration, each channel usually processes the input signal into a “static value”. Each static value has a configured warning

Alarm value, each two static values can be configured with a danger alarm value. The alarm delay time can be set by software. Front panel LED (Light emitting Diode) OK LED: indicates that 3500/40M is operating normally TX/RX LED: indicates that 3500/40M is communicating with other modules in the 3500 frame Bypass LED: indicates that 3500/40m is in bypass mode Sensor buffer output: The front panel should have a coaxial connector for each channel, and each coaxial connector should have short circuit protection.

A displacement monitor is a device used to monitor the displacement of an object. It can be used in various fields, such as construction engineering, Bridges, tunnels, mines, etc., to ensure that the displacement of objects does not exceed the safe range.

There are many kinds of displacement monitors, including mechanical, electronic, optical and so on. Among them, mechanical displacement monitors usually use mechanical components such as sliding blocks or rolling beads to measure the displacement of objects. Electronic displacement monitors use technology such as sensors and electronic circuits to measure the displacement of objects. The optical displacement monitor uses the optical principle to measure the displacement of the object.

公司介紹：
成都陽光不斷創新致力于提升停產的自動化零件供應水平，無論客戶身處何地，無論所需配件多么稀有，我們總能將客戶與所需產品緊密連接 ，成都陽光零部件覆蓋廣泛。
急切需要自動化或控制零件？ 全新、Used和已停產的自動化機械零件的全球供應商。
客戶支持快速響應
合作伙伴網絡橫跨各個大洲
全球合作伙伴網絡




Company Introduction:
Chengdu Sunshine Xihe Co., Ltd. specializes in one-stop procurement consulting for imported industrial spare parts, offering original equipment and professional discontinued parts services. We are committed to providing efficient and reliable automation solutions for our customers. Customer support fast responseThe network of partners spans all continentsGlobal partner networkAlways achieve more delivery, be it parts, service or speed



始終實現更多的交付，無論是零件、服務還是速度