This S62000-NA digital servo amplifier must be grounded with low resistance when connected from Kormogan to prevent electric shock. The amplifier is capable of producing high voltages up to 900 volts. Do not open or touch during operation. The equipment shall not be altered without the permission of the manufacturer. It is intended to be used as a component of motors and equipment. The outer conductor of the servo amplifier housing shall not exceed 1000 volts. If the machine with the amplifier installed does not comply with the national directive, the device shall not be used in offshore applications or on ships, nor shall it be commissioned. This servo amplifier comes with a guaranteed period about one year.

This amplifier must be transported at temperatures between -25 ° C and +70 ° C. The device can only be stored in its original recyclable packaging. It supports phase fault monitoring, short circuit protection and overvoltage identification. The unit has two analog monitoring outputs and two programmable digital outputs. This product supports an emergency stop function to shut down the machine on which it is installed. Digital devices must be protected from excessive stress. It must be mounted as close as possible to the power supply, choke and filter on a grounded conductive mounting plate in the cabinet.

The CB06551 servo amplifier can be damaged due to wrong or inappropriate motor wiring and wrong supply voltage. The programmable logic controller monitors the status of the device to confirm emergency situations. You can install the software using Settings that modify the product. The control cable and the power cable must be routed separately and at least 200 mm away from each other. The cables used for connection must comply with EN 60204. With the help of partner companies such as DHL and fedex, we can ship digital amplifiers to any address in the world.