描述

ECPSR-086370-001 HKQCS在線零件

Al和AO的講解
(1) AI信號:模擬量輸入
所謂模擬量即4-20mA或0- 10V的電流或電壓信號，輸入到DCS中，經過變換，還原出原來的值，比如電流值到DCS中顯示出來;電流互感器二次值(5A)經過電流變送器轉換成4-20mA信號(5A對應20mA) 輸入到DCS機柜,經過轉換，在DCS中顯示實際的電流值。
(2) AO信號:模擬量輸出
和Al相反，AO是DCS輸出4-20mA或0-10V信號，去控制設備的運行參數;比如，變頻器的速度控制過程，以40HZ為例，通過遠程DCS控制，認為給定參數值: 40HZ, DCS同樣發出一個對應的模擬量電流值，在4-20mA范圍內(20mA對應50HZ) ， 信號傳入到變頻器的控制器，變頻器按照要求運行在40HZ。

模擬量概念
在了解完上面的知識后，理解模擬量首先要了解幾個概念，傳感器、變送器、執行器還有AD轉換器、DA轉換器等。

那么這里所說的傳感器，我們常用的傳感器有哪些呢?常用的有溫度傳感器，又包括了熱電阻和熱電偶這兩種類型，還有壓力傳感器、濕度傳感器等等。傳感器是用于模擬量輸入的,用于采集外部的溫度、濕度、壓力等信號。

溫度探頭一般不可以直接接 入常用模擬量模塊，需要接入專用溫度模塊，或者加變送器。一般壓力傳感器也不能直接接入模擬量模塊，一 般是購買自帶變送器，或者使用壓力變送器。
那么當傳感器和變送器結合使用的時候可以將非電物理量轉換成統-的標準電量。這就是傳感器和變送器一個作用。

傳感器和變送器轉換出來的是一個標準電量，是電信號,我們的PLC是不能直接接收電信號的，那么就需要一個轉換， 也就是AD轉換，將模擬量轉換成數字量。
在我們PLC這邊，AD轉換器其實就是一個模擬量的輸入模塊， 而DA轉換器就是模擬量的輸出模塊。
而對于模擬量輸出，我們是做模擬量控制變頻器速度,從而控制電機速度;或者是模擬量控制伺服力矩和速度控制;又或者是模擬量控制比例閥的開度控制等。

ECPSR-086370-001 HKQCS在線零件

Al and AO’s explanation
(1) AI signal: analog input
The so-called analog quantity is 4-20mA or 0-10V current or voltage signal, input into the DCS, after transformation, restore the original value, such as the current value displayed in the DCS; The secondary value of the current transformer (5A) is converted by the current transmitter into a 4-20mA signal (5A corresponds to 20mA) and input to the DCS cabinet. After conversion, the actual current value is displayed in the DCS.
(2) AO signal: analog output
In contrast to Al, AO is the DCS output 4-20mA or 0-10V signal to control the operating parameters of the equipment; For example, the speed control process of the frequency converter, taking 40HZ as an example, through remote DCS control, that given the parameter value: 40HZ, DCS also sends a corresponding analog current value, in the range of 4-20mA (20mA corresponds to 50HZ), the signal is passed to the controller of the frequency converter, and the frequency converter runs at 40HZ as required.

Analog concept
After understanding the above knowledge, to understand the analog first to understand several concepts, sensors, transmitters, actuators and AD converter, DA converter and so on.

So the sensors mentioned here, what are the sensors we commonly use? Commonly used temperature sensors, including thermal resistance and thermocouple these two types, as well as pressure sensors, humidity sensors and so on. The sensor is used for analog input, which is used to collect external temperature, humidity, pressure and other signals.

The temperature probe can not be directly connected to the common analog module, the need to access the special temperature module, or add a transmitter. Generally, the pressure sensor can not be directly connected to the analog module, and it is generally necessary to buy its own transmitter, or use a pressure transmitter.
Then when the sensor and the transmitter are used in combination, the non-electrical physical quantity can be converted into a standard electricity quantity. That’s where sensors and transmitters come in.

Sensor and transmitter conversion is a standard electricity, is an electrical signal, our PLC is not able to directly receive electrical signals, then you need a conversion, that is, AD conversion, the analog quantity into digital quantity.
In our PLC side, the AD converter is actually an analog input module, and the DA converter is an analog output module.
For the analog output, we do the analog control frequency converter speed, so as to control the motor speed; Or analog control servo torque and speed control; Or it is the opening control of the analog proportional valve.

 

IC693ALG222 GE 16路模擬電壓輸入模塊	力士樂同步伺服電機
330101-00-50-10-02-05 Bently Nevada 3300 XL 8mm近距離探頭	IC754VS106STD GE人機界面(HMI)設備
330130-085-00-05 Bently Nevada 3300 XL標準加長電纜	IC694MDL340 GE 120 VAC, 0.5安培輸出模塊
Bently Nevada 5/8 mm Proximitor傳感器	2094-BC02-M02-M艾倫布拉德利Kinetix 6200組件
330903-01-25-05-01-CN Bently Nevada 5/ 8mm Proximitor傳感器	Allen-Bradley Kinetix 6500運動控制系統
IC697CGR772 GE雙總線熱備CPU控制模塊	2198-H015-ERS艾倫-布拉德利Kinetix 5500伺服驅動器
150-F480NBDB艾倫-布拉德利固態控制器	2198-H040-ERS艾倫布拉德利Kinetix 5500伺服驅動器
330104-6-14-50-02-00 Bently Nevada 3300 XL標準加長電纜	艾倫-布拉德利Kinetix 5500以太網I/P伺服驅動器
330103 -0-6-50-02-00 Bently Nevada 3300 XL標準加長電纜	1794-IRT8 Allen-Bradley Flex I/O組合模塊
力士樂HCS緊湊型轉換器/驅動器控制器	5069- l310ers2 Allen-Bradley SIL 2型CompactLogix 5069控制器
力士樂同步伺服電機	1734-IB8S艾倫-布拉德利點I/O守衛I/O安全模塊

 

公司介紹：
成都陽光不斷創新致力于提升停產的自動化零件供應水平，無論客戶身處何地，無論所需配件多么稀有，我們總能將客戶與所需產品緊密連接 ，成都陽光零部件覆蓋廣泛。
急切需要自動化或控制零件？ 全新、Used和已停產的自動化機械零件的全球供應商。
客戶支持快速響應
合作伙伴網絡橫跨各個大洲
全球合作伙伴網絡




Company Introduction:
Chengdu Sunshine Xihe Co., Ltd. specializes in one-stop procurement consulting for imported industrial spare parts, offering original equipment and professional discontinued parts services. We are committed to providing efficient and reliable automation solutions for our customers. Customer support fast responseThe network of partners spans all continentsGlobal partner networkAlways achieve more delivery, be it parts, service or speed



始終實現更多的交付，無論是零件、服務還是速度