描述

IS210BPPBH2CAA 系統和控制器的配置要重點考慮可靠性和負荷率

1、系統和控制器的配置

系統和控制器的配置要重點考慮可靠性和負荷率（包括冗余度）指標。通訊負荷率必須控制在合理范圍內，控制器的負荷率盡可能均衡，避免“高負荷”問題的發生。

2、系統控制邏輯分配

系統控制邏輯的分配，不宜過分集中在某個控制器上，主要控制器應采用冗余配置。

3、電源設計

電源設計必須合理可靠。注意電源設計的負荷率和電源的冗余配置方式，保證兩路獨立電源。

4、DCS系統接口

注重DCS系統接口的可靠性，注意重要接口的接口方式和冗余度。

通訊負荷率必須控制在合理范圍內，控制器的負荷率盡可能均衡，避免“高負荷”問題的發生。

2、系統控制邏輯分配

系統控制邏輯的分配，不宜過分集中在某個控制器上，主要控制器應采用冗余配置。

3、電源設計

電源設計必須合理可靠。注意電源設計的負荷率和電源的冗余配置方式，保證兩路獨立電源。

4、DCS系統接口

注重DCS系統接口的可靠性，注意重要接口的接口方式和冗余度。

 

IS210BPPBH2CAA 系統和控制器的配置要重點考慮可靠性和負荷率

1. Configuration of system and controller

Systems and controllers are configured with a focus on reliability and load rate (including redundancy). The communication load rate must be controlled within a reasonable range, and the load rate of the controller should be balanced as far as possible to avoid the occurrence of “high load” problems.

2. System control logic distribution

The distribution of the system control logic should not be too concentrated on one controller, and the main controller should adopt redundant configuration.

3. Power supply design

The power supply design must be reasonable and reliable. Pay attention to the load rate of the power supply design and the redundancy mode of the power supply to ensure that the two power supplies are independent.

4, DCS system interface

Pay attention to the reliability of DCS system interfaces, and pay attention to the interface mode and redundancy of important interfaces.

The communication load rate must be controlled within a reasonable range, and the load rate of the controller should be balanced as far as possible to avoid the occurrence of “high load” problems.

2. System control logic distribution

The distribution of the system control logic should not be too concentrated on one controller, and the main controller should adopt redundant configuration.

3. Power supply design

The power supply design must be reasonable and reliable. Pay attention to the load rate of the power supply design and the redundancy mode of the power supply to ensure that the two power supplies are independent.

4, DCS system interface

Pay attention to the reliability of DCS system interfaces, and pay attention to the interface mode and redundancy of important interfaces.

公司介紹：
成都陽光不斷創新致力于提升停產的自動化零件供應水平，無論客戶身處何地，無論所需配件多么稀有，我們總能將客戶與所需產品緊密連接 ，成都陽光零部件覆蓋廣泛。
急切需要自動化或控制零件？ 全新、Used和已停產的自動化機械零件的全球供應商。
客戶支持快速響應
合作伙伴網絡橫跨各個大洲
全球合作伙伴網絡




Company Introduction:
Chengdu Sunshine Xihe Co., Ltd. specializes in one-stop procurement consulting for imported industrial spare parts, offering original equipment and professional discontinued parts services. We are committed to providing efficient and reliable automation solutions for our customers. Customer support fast responseThe network of partners spans all continentsGlobal partner networkAlways achieve more delivery, be it parts, service or speed



始終實現更多的交付，無論是零件、服務還是速度