描述

SPS5710-2-LF 內部有處理器，內存，內部檢測等電路

SPS5710-2-LF控制器的底板。（C系列硬件都是由底板和模件兩部分組成，模件是插在底板上，用螺栓固定）

底板上會有好多接口用于SPS5710-2-LF控制器與其它部分的連接。

模件

模件是控制部分的主體，內部有處理器，內存，內部檢測等電路，控制部分的主要工作將在這里完成；模件上有LED燈和顯示屏，在這里能獲取到很多C300工作過程或故障中的各種信息

FTE網設備索引號

網絡中C300區別于其它節點（服務器、操作站、其它C300）的標識，可以理解為C300的IP地址（C300和服務器、操作站等都在同一個FTE網絡中，網絡中各個節點之間靠IP來區分）

備用電池接口

用專用電纜連接備用電池，目的是當C300沒電的時候保持C300內存RAM里的最新組態策略不丟失。

GPS時鐘源網絡接口

在自控系統中時鐘同步非常重要，也就是系統中的每個節點的時間最好一致。如果網絡中的每個節點的時間都取得GPS時鐘源設備，時鐘很容易保持一致。C300控制器可利用這個網口連接外部時鐘源，從時鐘源獲取時間。如這個網口未插網線去連接時鐘源，那么C300時間可通過軟件設定來源于服務器。

冗余網口

一對冗余的C300控制器這個網口用網線連接完成主備控制器之間數據同步。

連接FTE網的兩個網口

FTE網中任何一個節點都有兩個網口，用兩個不同顏色的網線連接兩臺不同的交換機（詳情可參閱FTE網），這就是那兩個網口，底板上有標明A和B.

IOLINK接口

C300作為控制部分的核心需要IO卡件的配合，C300的IO卡件就靠這兩對接口去連接IO.C300連接IO能力是有限的，每對接口最多能并聯40個IO，并且兩對接口連接IO的總數不能超過64個，而不是80個。（如上面接口并聯40個，那么下面接口只能接24個了）。接口成對出現也是冗余的概念，也就是每個IO卡件都有倆根IOLINK電纜與C300連接，斷一條不影響運營。

SPS5710-2-LF 內部有處理器，內存，內部檢測等電路

Mainboard of the SPS5710-2-LF controller. (The C series hardware is composed of two parts: the base plate and the module. The module is inserted into the base plate and fixed with bolts.)

There are many ports on the baseboard for connecting the SPS5710-2-LF controller to other parts.

module

Module is the main body of the control part, there are processors, memory, internal detection and other circuits, the main work of the control part will be completed here; There are LED lights and displays on the module, where you can get a lot of information about the working process or fault of the C300

FTE network device index number

The identification of C300 from other nodes (servers, operating stations, and other C300) in the network can be understood as the IP address of C300 (C300, server, operating station, etc., are in the same FTE network, and each node in the network is distinguished by IP).

Standby battery interface

The backup battery is connected with a dedicated cable to keep the latest configuration policies in the C300 RAM intact when the C300 is out of power.

GPS clock source network interface

Clock synchronization is very important in automatic control systems, that is, the time of each node in the system is best consistent. If the time of every node in the network is obtained from the GPS clock source device, the clock is easily consistent. The C300 controller can use this network port to connect to an external clock source and obtain time from the clock source. If this network port is not connected to the clock source, the C300 time can be set by software from the server.

Redundant network port

A pair of redundant C300 controllers This network port is connected by a network cable to synchronize data between the active and standby controllers.

Connect the two network ports of the FTE network

Any node in the FTE network has two network ports, with two different colors of network cables connected to two different switches (see FTE network for details), this is the two network ports, the bottom plate is marked with A and B.

IOLINK interface

As the core of the control part, the C300 needs the coordination of IO cards, and the C300 IO cards rely on these two pairs of interfaces to connect IO. The C300 IO connection capability is limited, each pair of interfaces can be connected to a maximum of 40 IO, and the total number of IO connected by two pairs of interfaces cannot exceed 64, rather than 80. (If the upper interface is connected to 40 in parallel, then the lower interface can only connect to 24). The interface pairs are also redundant concepts, that is, each IO card has two IOLINK cables connected to the C300, and breaking one does not affect operation.

公司介紹：
成都陽光不斷創新致力于提升停產的自動化零件供應水平，無論客戶身處何地，無論所需配件多么稀有，我們總能將客戶與所需產品緊密連接 ，成都陽光零部件覆蓋廣泛。
急切需要自動化或控制零件？ 全新、Used和已停產的自動化機械零件的全球供應商。
客戶支持快速響應
合作伙伴網絡橫跨各個大洲
全球合作伙伴網絡




Company Introduction:
Chengdu Sunshine Xihe Co., Ltd. specializes in one-stop procurement consulting for imported industrial spare parts, offering original equipment and professional discontinued parts services. We are committed to providing efficient and reliable automation solutions for our customers. Customer support fast responseThe network of partners spans all continentsGlobal partner networkAlways achieve more delivery, be it parts, service or speed



始終實現更多的交付，無論是零件、服務還是速度