描述

UAC389AE02? 工作原理是將輸入的直流電壓變?yōu)榭刂菩盘?hào)

可控硅模塊是采用模塊封裝形式，UAC389AE02具有三個PN結的四層結構的大功率半導體器件，最早是在1970年由西門康公司率先將模塊原理引入電力電子技術領域。可控硅模塊對目前的光伏發電系統提升有重要作用，它可以實現對光伏發電系統的有效調控。

判斷可控硅模塊好壞的方法如下：
1. 它是單規反并聯的，先把二和三短接起來比較好測量。
2. 短接起來之后先設一下把表筆，看一下表是不好壞。
3. 再測一下主回路短路片和后段是無窮大的，說明主回路沒問題。
4. 它有兩個觸發，一個是g一k一，兩組出發g一k一是一組阻值十八歐，另一組阻值是g二k二，十八點一，說明這兩個阻值匹配還是比較不錯的，說明這個模塊基本上沒什么問題。
5. 如果前后量著主回路的阻值不是無窮大，那這個模塊就壞了?；蛘呤橇恐鴊一k一，這兩組阻值差別太大，也是壞了。

可控硅模塊是一種電子器件，其工作原理是將輸入的直流電壓變?yōu)榭刂菩盘?hào)，然后驅動可控硅導通和關斷，實現對電路中交流功率開關元件的控制。

在可控硅模塊中，當控制電極施加一個大于觸發電壓的脈沖電壓時，UAC389AE02可控硅會進入導通狀態，電流可以通過可控硅流動。當電流的控制下，使被控制電路中的交流功率開關元件按預定方向動作。當接通或切斷一定數量的電流后，由于PN結正向?qū)ǖ慕惶孀兓a(chǎn)生熱量而使溫度升高；同時由于漏源極之間存在一定的電阻值，因此會產生一定的反向電動勢將多余的電能消耗掉；最后通過調節觸發角的大小就可以達到對負載進行調制的目的。

可控硅模塊具有雙向?qū)щ娔芰涂刂齐娏髁鲃?dòng)的特性，UAC389AE02 因此在各種電子設備和系統中得到廣泛應用。例如，在交流電機控制、自動控制系統、電力系統、照明控制等領域都有廣泛應用。

總之，可控硅模塊的工作原理主要是通過控制電極施加脈沖電壓來驅動可控硅導通和關斷，實現對電路中交流功率開關元件的控制。通過調節觸發角的大小可以實現對負載的調制。由于其具有雙向?qū)щ娔芰涂刂齐娏髁鲃?dòng)的特性，因此得到廣泛應用。

UAC389AE02? 工作原理是將輸入的直流電壓變?yōu)榭刂菩盘?hào)

SCR module is a high-power semiconductor device in the form of module package, UAC389AE02 with three PN junction four-layer structure, which was first introduced into the field of power electronics by Ximenkang Company in 1970. Thyristor module plays an important role in the promotion of the current photovoltaic power generation system, and it can realize the effective regulation of the photovoltaic power generation system.

The method of judging the thyristor module is as follows:
1. It is single-gauge anti-parallel, and it is better to measure the two and three short connections first.
2. After the short connection, first set the marker and see whether the table is good or bad.
3. Test the main circuit short circuit sheet and the rear segment is infinite, indicating that the main circuit is no problem.
4. It has two triggers, one is g one k one, two groups of starting g one k one is a group of resistance value of 18 euros, and the other group of resistance value is g two k two, 18.1, indicating that the two resistance values match is still relatively good, indicating that this module is basically no problem.
5. If the resistance value of the main circuit is not infinite before and after measurement, the module is broken. Or is to measure g, k, one, the difference between the two groups of resistance values is too big, it is also bad.

Thyristor module is an electronic device, its working principle is to change the input DC voltage into a control signal, and then drive the thyristor on and off, to achieve the control of AC power switching components in the circuit.

In the thyristor module, when the control electrode applies a pulse voltage greater than the trigger voltage, the UAC389AE02 thyristor will enter the on-state, and the current can flow through the thyristor. When the current is controlled, the AC power switch element in the controlled circuit acts in a predetermined direction. When a certain amount of current is switched on or off, heat is generated due to the alternating change of PN junction positive conduction and the temperature increases. At the same time, because there is a certain resistance value between the drain-source electrode, a certain reverse electromotive force will be generated to consume the excess electric energy. Finally, the load can be modulated by adjusting the size of the trigger Angle.

The thyristor module has the characteristics of bidirectional conductivity and current flow control, so UAC389AE02 is widely used in various electronic devices and systems. For example, it is widely used in AC motor control, automatic control system, power system, lighting control and other fields.

In short, the working principle of the thyristor module is mainly to drive the thyristor on and off by applying pulse voltage to the control electrode, and realize the control of the AC power switching element in the circuit. The load can be modulated by adjusting the trigger Angle. Because of its bidirectional conductivity and the characteristics of controlling current flow, it has been widely used.

公司介紹：
成都陽光不斷創新致力于提升停產的自動化零件供應水平，無論客戶身處何地，無論所需配件多么稀有，我們總能將客戶與所需產品緊密連接 ，成都陽光零部件覆蓋廣泛。
急切需要自動化或控制零件？ 全新、Used和已停產的自動化機械零件的全球供應商。
客戶支持快速響應
合作伙伴網絡橫跨各個大洲
全球合作伙伴網絡




Company Introduction:
Chengdu Sunshine Xihe Co., Ltd. specializes in one-stop procurement consulting for imported industrial spare parts, offering original equipment and professional discontinued parts services. We are committed to providing efficient and reliable automation solutions for our customers. Customer support fast responseThe network of partners spans all continentsGlobal partner networkAlways achieve more delivery, be it parts, service or speed



始終實現更多的交付，無論是零件、服務還是速度