描述

UAD149 勵磁控制單元的作用是根據發電機的運行狀態

勵磁控制單元是勵磁系統的核心部分，主要作用是控制勵磁電流，UAD149實現發電機的勵磁調節。勵磁控制單元的種類有很多，比如ABB的KUC711AE 靜態和間接勵磁系統，適用于20至12000A的電流范圍，它專為水力、聯合循環和抽水蓄能發電廠設計。

勵磁控制單元主要包括勵磁調節器、勵磁功率單元等部分。勵磁控制單元的作用是根據發電機的運行狀態，自動調節功率單元輸出的勵磁電流，以滿足發電機運行的需要。

勵磁調節器是勵磁控制單元的核心部分，UAD149感受發電機的電壓、電流或其他參數的變化，然后對勵磁功率單元施加控制作用，進行勵磁調節。具體來說，勵磁調節器的工作方式包括自動方式和手動方式。在自動方式下，勵磁調節器比較發電機實際端電壓與自動給定值，用以控制端電壓。在手動方式下，勵磁調節器比較發電機實際勵磁電流與手動給定值，用以控制勵磁電流（當PT故障時）。

勵磁功率單元的作用是向同步發電機的勵磁繞組提供直流勵磁電流，建立直流磁場。它通過向同步發電機的勵磁繞組提供直流勵磁電流，使發電機的磁場得到適當?shù)膹娙鹾头较?，從而維持發電機正常運行所需的電壓和電流。

勵磁控制單元的工作原理可以根據不同的勵磁方式和電源供給方式有所不同。按照勵磁電源的供給方式，勵磁方式可以分為直流勵磁系統、交流勵磁系統和靜態勵磁系統。按照勵磁電流的供給方式，勵磁方式可以分為他勵和自勵兩種方式。

UAD149勵磁控制單元的工作原理主要是根據發電機的運行狀態，自動調節功率單元輸出的勵磁電流，以滿足發電機運行的需要。通過勵磁調節器和勵磁功率單元的協同工作，可以實現對發電機勵磁的精確控制，提高發電機的穩定性和可靠性。

勵磁控制單元的參數設置需要輸入密碼，密碼為3413416位數，長按參數鍵大概3秒鐘，等參數設置的燈閃亮的時候就輸入密碼341341。在現場僅需要設置三個參數，第一個參數是功率因素的設置，出場的時候是0.85，如果現場有需要可以設置到0.99，設置到0.99就基本上是只發有功不發無功。第二個參數是電流互感器一次跟二次的電流比值，出場設定是100，可以根據現場電流互感器的大小來去設置。第三個參數是發電機額定電流與電流互感器一次電流的百分比，出場設定是百分之80。

UAD149 勵磁控制單元的作用是根據發電機的運行狀態

Excitation control unit is the core part of the excitation system, the main role is to control the excitation current, UAD149 to achieve the excitation regulation of the generator. There are many types of excitation control units, such as ABB’s KUC711AE static and indirect excitation system, which is suitable for the current range of 20 to 12000A and is designed for hydraulic, combined cycle and pumped storage power plants.

The excitation control unit mainly includes the excitation regulator, the excitation power unit and so on. The role of the excitation control unit is to automatically adjust the excitation current output by the power unit according to the running state of the generator to meet the needs of the generator operation.

The excitation regulator is the core part of the excitation control unit. UAD149 senses the change of voltage, current or other parameters of the generator, and then exerts control effect on the excitation power unit to perform excitation regulation. Specifically, the mode of operation of the excitation regulator includes automatic mode and manual mode. In the automatic mode, the excitation regulator compares the actual terminal voltage of the generator with the automatic set value to control the terminal voltage. In manual mode, the excitation regulator compares the actual excitation current of the generator with the manual given value to control the excitation current (when the PT fails).

The role of excitation power unit is to provide DC excitation current to the excitation winding of synchronous generator and establish DC magnetic field. It provides DC excitation current to the excitation winding of synchronous generator, so that the generator’s magnetic field can get the appropriate strength and direction, so as to maintain the voltage and current required for the normal operation of the generator.

The working principle of the excitation control unit can vary according to different excitation methods and power supply methods. According to the supply mode of excitation power, the excitation mode can be divided into DC excitation system, AC excitation system and static excitation system. According to the supply mode of excitation current, the excitation mode can be divided into two ways: separate excitation and self-excitation.

The working principle of UAD149 excitation control unit is to automatically adjust the excitation current output of the power unit according to the operating state of the generator to meet the needs of the generator operation. Through the cooperative work of excitation regulator and excitation power unit, the precise control of generator excitation can be realized, and the stability and reliability of generator can be improved.

The parameter setting of the excitation control unit needs to enter a password, the password is 3413416 digits, long press the parameter key for about 3 seconds, and enter the password 341341 when the parameter setting light flashes. Only three parameters need to be set in the field, the first parameter is the setting of the power factor, which is 0.85 at the time of appearance, if the field needs to be set to 0.99, set to 0.99 is basically only active power without reactive power. The second parameter is the ratio of primary and secondary current of the current transformer. The output setting is 100, which can be set according to the size of the field current transformer. The third parameter is the percentage of the rated current of the generator to the primary current of the current transformer, and the output setting is 80 percent.

公司介紹：
成都陽光不斷創新致力于提升停產的自動化零件供應水平，無論客戶身處何地，無論所需配件多么稀有，我們總能將客戶與所需產品緊密連接 ，成都陽光零部件覆蓋廣泛。
急切需要自動化或控制零件？ 全新、Used和已停產的自動化機械零件的全球供應商。
客戶支持快速響應
合作伙伴網絡橫跨各個大洲
全球合作伙伴網絡




Company Introduction:
Chengdu Sunshine Xihe Co., Ltd. specializes in one-stop procurement consulting for imported industrial spare parts, offering original equipment and professional discontinued parts services. We are committed to providing efficient and reliable automation solutions for our customers. Customer support fast responseThe network of partners spans all continentsGlobal partner networkAlways achieve more delivery, be it parts, service or speed



始終實現更多的交付，無論是零件、服務還是速度