XV-440-10TVB-1-13-1 處理方法包括使用工業顯示器本身所帶的色彩功能設置調整色彩設置

全部區域顯示偏色:這可能是由于顯示器的顏色設置出現偏差或顯示卡的色彩設置出現偏差。處理方法包括使用工業顯示器本身所帶的色彩功能設置調整色彩設置,調整顯示卡的色彩設置。

無顯示:這可能是由多種原因引起的,包括工業顯示器電路故障、工業主機故障、工業顯示器的電源輸入故障、工業顯示器信號線和主機顯示卡接觸不良等。處理方法包括檢查并更換損壞的部件,確保信號線插頭與顯示卡相固定,保證完全接觸到位。

描述

XV-440-10TVB-1-13-1 處理方法包括使用工業顯示器本身所帶的色彩功能設置調整色彩設置

XV-440-10TVB-1-13-1 工業顯示屏模塊常見故障及其處理方法如下:

顯示區域出現偏色或光斑:這可能是由于工業顯示器所在環境存在較大的交變磁場,導致顯示器磁化。處理方法包括查找附近是否存在大功率電器如大功率變壓器、音箱等設備,并將其移開,使用工業顯示器本身所帶的消磁功能進行消磁,改變工業顯示器擺放的方向以減少地磁對其的影響。

全部區域顯示偏色:這可能是由于顯示器的顏色設置出現偏差或顯示卡的色彩設置出現偏差。處理方法包括使用工業顯示器本身所帶的色彩功能設置調整色彩設置,調整顯示卡的色彩設置。

無顯示:這可能是由多種原因引起的,包括工業顯示器電路故障、工業主機故障、工業顯示器的電源輸入故障、工業顯示器信號線和主機顯示卡接觸不良等。處理方法包括檢查并更換損壞的部件,確保信號線插頭與顯示卡相固定,保證完全接觸到位。

此外,XV-440-10TVB-1-13-1還有一些其他故障和處理方法:

部分區域出現偏色或光斑:這可能是由于工業顯示器部分區域出現偏色或光斑。處理方法包括查找附近是否存在大功率電器如大功率變壓器、音箱等設備,并將其移開,使用工業顯示器本身所帶的消磁功能進行消磁,改變工業顯示器擺放的方向以減少地磁對其的影響。

花屏:這可能是由于系統下不顯示或花屏。處理方法包括更換顯示器確認顯示器是否正常,更換顯示器線材是否正常,確認機器是否有顯卡,同時顯示器是否連接到顯卡上;若在顯卡上,首先嘗試更換顯示接口,仍不顯示或花屏,嘗試更換顯卡驅動;確認機器無顯卡,同時開機后為雙顯,但只有一個顯示,確認系統驅動正常后,檢查顯示模式是否有被斷開導致,設置成擴展或克隆顯示,在確認顯示是否正常。

網絡異常:這可能是由于網絡故障引起的。處理方法包括檢查連接網線是否正常、網絡接口內彈針是否正常、確認網絡IP是否有被固定、固定IP與實際所在局域網IP區間內、使用CMDping命令 ping局域網內網關IP、確認是否可以ping通、查看網絡燈狀態是否正常、網絡連接是否被禁用等。

XV-440-10TVB-1-13-1 處理方法包括使用工業顯示器本身所帶的色彩功能設置調整色彩設置

XV-440-10TVB-1-13-1 Common faults of industrial display modules and their solutions are as follows:

Color bias or light spots in the display area: this may be due to the presence of a large alternating magnetic field in the environment of the industrial display, resulting in the magnetization of the display. Processing methods include finding whether there is a nearby high-power electrical appliances such as high-power transformers, speakers and other equipment, and move it away, using the industrial display itself with the degaussing function for degaussing, change the direction of the industrial display to reduce the impact of geomagnetic.

All areas display color bias: This may be due to a deviation in the color Settings of the display or a deviation in the color Settings of the display card. The processing method includes using the color function Settings of the industrial display itself to adjust the color Settings and adjust the color Settings of the display card.

No display: This may be caused by a variety of reasons, including industrial display circuit failure, industrial host failure, industrial display power input failure, industrial display signal line and poor contact with the host display card. The treatment method includes checking and replacing the damaged parts, ensuring that the signal cable plug is fixed with the display card, and ensuring that the contact is fully in place.

In addition, XV-440-10TVB-1-13-1 has some other faults and handling methods:

Partial color or light spots: This may be due to partial color or light spots in some areas of industrial displays. Processing methods include finding whether there is a nearby high-power electrical appliances such as high-power transformers, speakers and other equipment, and move it away, using the industrial display itself with the degaussing function for degaussing, change the direction of the industrial display to reduce the impact of geomagnetic.

Flower screen: This may be due to the system does not display or flower screen. The processing methods include replacing the monitor to confirm whether the monitor is normal, replacing the monitor wire is normal, confirming whether the machine has a graphics card, and whether the monitor is connected to the graphics card; If on the graphics card, first try to replace the display interface, still do not display or spend the screen, try to replace the graphics card driver; Confirm that the machine has no graphics card, and there is dual display after starting up, but only one display. After confirming that the system driver is normal, check whether the display mode is disconnected, and set it to extended or clone display, and confirm whether the display is normal.

Network exception: This may be caused by a network fault. Troubleshooting methods include checking whether the network cable is normal, whether the pins in the network interface are normal, whether the network IP address is fixed, whether the fixed IP address is within the IP address range of the actual LAN, using the CMDping command to ping the gateway IP address of the LAN, whether the network indicator is normal, and whether the network connection is disabled.

公司介紹:
成都陽光不斷創新致力于提升停產的自動化零件供應水平,無論客戶身處何地,無論所需配件多么稀有,我們總能將客戶與所需產品緊密連接 ,成都陽光零部件覆蓋廣泛。
急切需要自動化或控制零件? 全新、Used和已停產的自動化機械零件的全球供應商。
客戶支持快速響應
合作伙伴網絡橫跨各個大洲
全球合作伙伴網絡




Company Introduction:
Chengdu Sunshine Xihe Co., Ltd. specializes in one-stop procurement consulting for imported industrial spare parts, offering original equipment and professional discontinued parts services. We are committed to providing efficient and reliable automation solutions for our customers. Customer support fast responseThe network of partners spans all continentsGlobal partner networkAlways achieve more delivery, be it parts, service or speed



始終實現更多的交付,無論是零件、服務還是速度