描述

MTL5501-SR 通道安全輸入模塊

Installationa)
安裝必須符合相應的歐洲、國家和地方法規，其中可能包括參考IEC實施規范IEC 60079-14。此外，特定行業或最終用戶可能對其設備的安全性有特定要求，這些要求也應得到滿足。對于大多數裝置，指令1999/92/EC [ATEX指令-裝置安全]也適用。

b)本設備為配套電氣設備，通常安裝在非危險[安全]區域。如果滿足相關安裝條件，描述為符合第3類的特定設備可以安裝在第2區位置。當安裝在2區位置時，設備必須提供一個外殼，這是一個適合區域分類的額外保護程度。

c)除非設計已經保護，否則本設備必須有一個合適的外殼保護，以防止:i)機械和熱應力超過認證文件和產品規范中規定的應力;ii)腐蝕性物質，過量的灰塵，水分和其他污染物。有關任何額外或更具體的信息，請參閱下面的安全使用特殊條件。

2區應用的特殊安全使用條件a)在2區使用時
2、設備必須安裝在提供至少IP54防護等級的外殼或環境中，并滿足EN 60079-0:2012和EN 60079-15:2010的相關材料和環境要求。

b)設備不得插入或移除，除非:i)設備安裝的區域已知是無危險的;i)它所連接的電路已經斷電。c)本設備的24V電源必須來自符合歐盟指令要求的穩壓電源。

d)僅適用于5511、5514、5514D、5516C、5517、5526和5532:繼電器觸點可切換至35V、2A和100VA。對于5575:繼電器觸點可以切換到35V, 250mA.e)對于5573最大輸入/輸出參數-見證書。

MTL5501-SR 通道安全輸入模塊

Installationa)
The installation must comply with the appropriate European, national and local regulations,which may include reference to the IEC code of practice IEC 60079-14. In addition, particularindustries or end users may have specific requirements relating to the safety of theirinstallations and these requirements should also be met. For the majority of installations theDirective 1999/92/EC [the ATEX Directive – safety of installations] is also applicable.

b) This apparatus is an associated electrical apparatus and is normally mounted in a non-hazardous [safe] area. Specific apparatus described as Category 3 compliant may beinstalled in a Zone 2 location providing that the relevant installation conditions are met. Whenmounted in a Zone 2 location the apparatus must be provided with an enclosure, whichoffers an additional degree of protection appropriate to the area classification.

c) Unless already protected by design, this equipment must be protected by a suitableenclosure against:i) mechanical and thermal stresses in excess of those noted in the certificationdocumentation and the productspecificationii) aggressive substances, excessive dust, moisture and other contaminants. Read also the Special Conditions for Safe Use (below) for any additional or more specificinformation.

Special Conditions of Safe Use for Zone 2 applicationsa)When used in Zone
2, the equipment must be installed in an enclosure or anenvironment that provides a degree of protection of at least IP54 and meetsthe relevant material and environmental requirements of EN 60079-0:2012and EN 60079-15:2010.

b) The equipment must not be inserted or removed unless either:i) the area in which the equipment is installed is known to be non-hazardousorii) the circuit to which it is connected has been de-energised.c)The 24V supply for this equipment must be derived from a regulated powersupply complying with the requirements of European Community Directives.

d) For 5511, 5514, 5514D, 5516C, 5517, 5526 & 5532 only: Relay contacts mayswitch up to 35V, 2A and 100VA. For 5575: Relay contacts may switch up to 35V, 250mA.e) For 5573 Maximum Input/Output parameters – see certificate.

 

IC693ALG222 GE 16路模擬電壓輸入模塊	力士樂同步伺服電機
330101-00-50-10-02-05 Bently Nevada 3300 XL 8mm近距離探頭	IC754VS106STD GE人機界面(HMI)設備
330130-085-00-05 Bently Nevada 3300 XL標準加長電纜	IC694MDL340 GE 120 VAC, 0.5安培輸出模塊
Bently Nevada 5/8 mm Proximitor傳感器	2094-BC02-M02-M艾倫布拉德利Kinetix 6200組件
330903-01-25-05-01-CN Bently Nevada 5/ 8mm Proximitor傳感器	Allen-Bradley Kinetix 6500運動控制系統
IC697CGR772 GE雙總線熱備CPU控制模塊	2198-H015-ERS艾倫-布拉德利Kinetix 5500伺服驅動器
150-F480NBDB艾倫-布拉德利固態控制器	2198-H040-ERS艾倫布拉德利Kinetix 5500伺服驅動器
330104-6-14-50-02-00 Bently Nevada 3300 XL標準加長電纜	艾倫-布拉德利Kinetix 5500以太網I/P伺服驅動器
330103 -0-6-50-02-00 Bently Nevada 3300 XL標準加長電纜	1794-IRT8 Allen-Bradley Flex I/O組合模塊
力士樂HCS緊湊型轉換器/驅動器控制器	5069- l310ers2 Allen-Bradley SIL 2型CompactLogix 5069控制器
力士樂同步伺服電機	1734-IB8S艾倫-布拉德利點I/O守衛I/O安全模塊

 

公司介紹：
成都陽光不斷創新致力于提升停產的自動化零件供應水平，無論客戶身處何地，無論所需配件多么稀有，我們總能將客戶與所需產品緊密連接 ，成都陽光零部件覆蓋廣泛。
急切需要自動化或控制零件？ 全新、Used和已停產的自動化機械零件的全球供應商。
客戶支持快速響應
合作伙伴網絡橫跨各個大洲
全球合作伙伴網絡




Company Introduction:
Chengdu Sunshine Xihe Co., Ltd. specializes in one-stop procurement consulting for imported industrial spare parts, offering original equipment and professional discontinued parts services. We are committed to providing efficient and reliable automation solutions for our customers. Customer support fast responseThe network of partners spans all continentsGlobal partner networkAlways achieve more delivery, be it parts, service or speed



始終實現更多的交付，無論是零件、服務還是速度