描述

VM600-MPC4-200-510-071-113-200-510-111-034 利用機械原理來測量振動，精度較低，但價格便宜且使用壽命長

使用振動表時需要注意以下事項：
– 避免摔打、敲擊傳感器，其連接導線不宜扭曲或從根部拉動。
– 儀器每年需要標定一次。
– 長期不使用時，從儀器后面電池盒取下電池，避免電池?fù)p壞。
– 當儀器顯示有誤時，應考慮電池是否欠壓或傳感器是否損壞。

此外，在放置或取下振動傳感器時，要注意和磁座一起取下，不要只拉扯電纜。

振動表的類型可以根據不同的分類標準進行劃分，以下是一些常見的分類方式：

VM600-MPC4-200-510-071-113-200-510-111-034 按測量原理分：
機械式振動表： 利用機械原理來測量振動，精度較低，但價格便宜且使用壽命長。
電子式振動表：通過傳感器將振動轉換成電信號，再進行處理和顯示，精度較高，功能豐富。
按使用方式分：
便攜式振動表：便于攜帶，可以隨時隨地測量振動，適合現場使用。
固定式振動表：固定安裝在某一位置，長期監測振動情況。
按測量參數分：
單通道振動表：只測量一個方向的振動。
多通道振動表：可以同時測量多個方向的振動。
按應用領域分：
結構健康監測振動表：用于監測大型結構或建筑物的振動和健康狀況。
車輛振動表：用于監測車輛的振動情況，評估車輛性能或診斷故障。
環境振動表：用于監測環境中的振動，如地震、機械振動等。
按顯示方式分：
模擬顯示振動表：采用指針或刻度盤來顯示測量結果。
數字顯示振動表：采用數字顯示屏來顯示測量結果，讀數直觀且精度高。
按傳感器分：
電渦流式振動表：利用電渦流原理來測量金屬物體的振動。
壓電式振動表：利用壓電材料的逆壓電效應來測量非金屬物體的振動。
此外，根據廠家和品牌不同，也存在許多特定的或定制的振動表型號。選擇合適的振動表類型取決于具體的測量需求和應用場景。

VM600-MPC4-200-510-071-113-200-510-111-034 利用機械原理來測量振動，精度較低，但價格便宜且使用壽命長

Note the following when using a vibration meter:
– Avoid hitting or knocking the sensor, and the connecting wire should not be twisted or pulled from the root.
– Instruments need to be calibrated once a year.
– When not in use for a long time, remove the battery from the battery box behind the instrument to avoid battery damage.
– When the instrument displays an error, consider whether the battery is under voltage or the sensor is damaged.

In addition, when placing or removing the vibration sensor, be careful to remove it with the magnetic seat and do not just pull the cable.

The type of vibration table can be divided according to different classification criteria, the following are some common classification methods:

VM600-MPC4-200-510-071-113-200-510-111-034 According to the measurement principle:
Mechanical vibration meter: The use of mechanical principles to measure vibration, low accuracy, but cheap and long service life.
Electronic vibration meter: the vibration is converted into electrical signal through the sensor, and then processed and displayed, with high precision and rich functions.
Divided by use:
Portable vibration meter: Easy to carry, you can measure vibration anytime, anywhere, suitable for field use.
Fixed vibration meter: fixed installation in a certain position, long-term monitoring of vibration.
According to the measurement parameters:
Single-channel vibration meter: Only one direction of vibration is measured.
Multi-channel vibration meter: can measure vibration in multiple directions simultaneously.
By application field:
Structural Health Monitoring Vibration meter: Used to monitor the vibration and health of large structures or buildings.
Vehicle vibration meter: Used to monitor vehicle vibration, evaluate vehicle performance or diagnose faults.
Environmental vibration meter: Used to monitor the vibration in the environment, such as earthquake, mechanical vibration, etc.
Divided by display mode:
Analog display vibration meter: Use a pointer or dial to display measurement results.
Digital display vibration meter: Using a digital display to display the measurement results, the reading is intuitive and high precision.
By sensor:
Eddy current vibration meter: The principle of eddy current is used to measure the vibration of metal objects.
Piezoelectric vibration meter: Using the inverse piezoelectric effect of piezoelectric materials to measure the vibration of non-metallic objects.
In addition, depending on the manufacturer and brand, there are many specific or customized vibration meter models. Choosing the right type of vibration meter depends on the specific measurement requirements and application scenarios.

公司介紹：
成都陽光不斷創新致力于提升停產的自動化零件供應水平，無論客戶身處何地，無論所需配件多么稀有，我們總能將客戶與所需產品緊密連接 ，成都陽光零部件覆蓋廣泛。
急切需要自動化或控制零件？ 全新、Used和已停產的自動化機械零件的全球供應商。
客戶支持快速響應
合作伙伴網絡橫跨各個大洲
全球合作伙伴網絡




Company Introduction:
Chengdu Sunshine Xihe Co., Ltd. specializes in one-stop procurement consulting for imported industrial spare parts, offering original equipment and professional discontinued parts services. We are committed to providing efficient and reliable automation solutions for our customers. Customer support fast responseThe network of partners spans all continentsGlobal partner networkAlways achieve more delivery, be it parts, service or speed



始終實現更多的交付，無論是零件、服務還是速度